New Ball Balloon Valve Control Pinch Valve

Product Description

Construction is as follows:  

Name	Pinch Valve
Structure	Sleeve type soft sealing plug valve
Size	1/2"~16"; DN15~DN400
Normal pressure	PN10, PN16, 150LB, 10K
Design standard	Q/JBGN02,Q/WND 01-2015
Marked	MSS SP-25
End flange	ANSI B 16.5,ASME B16.47; EN1092,DIN2543~DIN2547,AS2129
Face to Face	Q/JBGN02
Test standard	Q/JBGN02,Q/WND 01-2015
Suitable temperature	-29~150°C
Medium	oil,chemical,food,power,ore pla
Acidic environment	NACE MR0175
Operation	Hand Operated,Gear Operated, Electrical Actuated, Pheumatic Actuated

Structure & Working Principle:

1. Structure: a valve from the next alloy valve, rubber tubes, the size stem lock, the next column, and other
   derivative component parts.

2.Principle:When smooth transfer vessel,stems size,benefit following the same time led board,compression tube
   sets for closure instead immediately opened.Thus, a guided-lock reciprocation between the opening
and closing valves to complete the work,another for rubber tube or bearing small,closed at the beginning ,
operators when rotating the handwheel is appropriate as long as the conflict reach the opening and closing pole.Never make every effort more support,banned other tools come close.

3:Application:Pinch Valve is used to replace regular valve like butterfly valve, gate valve, ball valve and so on,
it is suitable for water, sewage, oil, slurry, acid or alkaline solution and so on. Especially suitable for thermal
  power plant,  waste-flushing and ash-flushing system of steel plants, with the advantage of anti-abrasive,
scaling preventing, corrosion resistance.

Features

- Full diameter: when tube pinch valve is fully opened, the flow channel is cylinder rubber pipeline, the diameter   is equal to valve nominal diamter, without turn and crack. No eddy, no vibration, no noise and no cavitation. Suitable for high velocity fluid valve

- -Scaling preventing: Valve flow channel is made of rubber, with smooth inside wall, not easy to scaling.Everytime when closing and opening, scaling will be crushed away valve

- - Closing tightly: Rubber flow channel has the advantage of fine wraping cability, valve can been closed tightly even if there is sundries on sealing surface valve

 - Anti-abrasive and corrosion resistance valve

- - No maintance: Rubber channel is the only parts meets fluid, no packing material needed, medium will not corrode other parts of valve. Service life is long, and no need maintance.

Advantages of Manul Pinch Valves:

1. Very Clean	6. Low weight
2. Excellent drainage	7. Easy operation
3. Minimal turbulence	8. Can be used in explosion-proof lines
4. Low airborne contaminants	9. Inexpensive
5. Low maintenance

 
Main Part & Materials:

Part Names	Part Materials
Under Valve Body	Aluminium alloy,Ductile Iron,cast iron,cast steel,WCB, stainless steel
Lower Valve Body	Aluminium alloy,Ductile Iron,cast iron,cast steel,WCB, stainless steel
Lifting Board	Aluminium alloy,Ductile Iron,cast steel,WCB, stainless steel
Guide Stick	SS304
Under Clamp Stick	SS304
Lower Clamp Stick	SS304
Stem	SS304
Stem Nut	Copper base alloy
Sleeve	Natural rubber, EPDM, NBR, FPM, IIR
Handwheel	Ductile Iron,cast steel

Size:

DN(mm)	PN(MPa)	L	L1	L0	D	D1	D0	H	Z-Φ	Weight (kg)
25	0.6	142	124	31	115	85	120	150	4-14	3
32		160	145	40	*140	100	140	174	4-18	4.5
40		180	157	50	*150	110	140	186	4-18	5.5
50		210	160	60	160	125	160	205	4-18	7.5
65		250	199	74	180	145	160	238	4-18	9.0
80		300	222	88	195	160	200	241	4-18	13.5
100		350	250	106	215	180	240	301	8-18	20
125		430	318	134	245	210	280	360	8-18	27.5
150		500	350	158	280	240	320	405	8-23	43
200	0.4	650	446	206	335	295	560	545	8-23	85
250		800	516	256	*395	350	560	632	12-23	138
300		950	562	304	*445	400	620	741	12-23	195
Design and Manufacture:Q/JBGN02,Construction Length:Q/JBGN02,Flange connection Size:JB/T 78-194(1.0Mpa)
Accept customer's drawing

Product display


Company  Introduction